If you've up-graded one's own Sky+ reciever to get all new Sky+ HD reciever you have a choice of getting your items fitted through a qualified Sky technician or you can elect to setup the equipment all by yourself. One could goto
cccam for more information on Kia Optima.
Should you have recently replaced to a new Sky box and picked the Self Install option this informative guide will support you in installation of and initiating your new equipment. There's certainly no longer any necessity for one to ring us to switch on you're viewing card it could actually be accomplished on line at one time you like.
Do it yourself Installment : Sky+HD
To run Sky+ HD you will want :
• A Sky+HD reciever
• A HD/HD Ready Television (to benefit by way of Hd Channels)
• An HDMI cable (To attach you're HD TV also Sky+ HD box to get High def programs)
• One or Two Dish Input Cabling ( To benefit via the full popular features of Sky+ you need 2 Dish Input Cables linked of one's Satellite dish on your Sky+ HD box)
• Sky Viewing Card
Installation : Self Setup
To install a Sky+HD reciever with a pair of dish input connectors you need to try these particular actions :
Notice that any recordings already kept within your Sky+box is definitely not sent to your newly purchased Sky+HD box. Whatever recordings saved in the hard disk drive of one's box will not be available. Any video recordings ought to be seen or transferred to an alternate file format (DVD / Hard Drive).
Disconnecting your old apparatus :
1. Disconnect your current Sky+ box from the mains power source.
2. Unscrew the dish input cables from your Sky+ box
3. Disconnect the SCART cable connected between the T . v . with your Sky+ receiever
4. Get rid of your current Sky Viewing Card (The Sky viewing card is likely to be kept behind a flap on your front right-hand panel of one's Sky+ box).
Linking the new equipment :
1. Connect the two dish input cables into the Dish Input One and Dish Input Two connections on your rear of your respective Sky+ HD box.
2. Connect the HDMI cable in the HDMI video slot at the rear on your Sky+ HD reciever along with the corresponding end connected to the HDMI slot on your Hdtv.
3. Connect your line into the telephone outlet around the back end in the box.
4. Link up the Sky+ HD box on the mains power
5. The Sky+ HD box will illuminate an amber/red light on your front panel on the receiver showing standby function. The reciever should be in on standby mode for Only two min's in advance of powering up your box.
6. Power up ones Sky+ HD box by pressing the Sky key on the Handheld Control
7. You'll end up presented with the Sky Information Channel onscreen (Channel 998)
8. With your Sky Rc select Channel 106 (Sky One)
9. You will probably be presented with an On-screen Note telling "Please insert your Sky Viewing Card"
10. Insert your Sky viewing card in the viewing card slot (the viewing card slot is placed behind a flap on your front panel of the Sky+ HD reciever).
11. To totally initialize your Sky+HD services and monthly subscription stations you will want to couple your Sky viewing card into your all new device.
