Answer: There are many kinds of laminates and each needs its own mode. What should be considered when working with laminate on a CNC milling machine? It can melt.
Plastic is milled at low rpm.
+ Use an oil mist or coolant.
The second point is the cutter. Take either a special one for plastic or a universal one, but not a thick one.
It's better to use a single cutter than a six-feed one. The latter will make the chips small and ..... Right, it melts harder.
The third thing is to remove the chips. It sticks to the tool, which affects the performance of the cutter. Use aspiration, which will remove the chips.
