Bom, aqui vai mais um tutorial teórico.
Neste tópico vamos pegar uma noção melhor sobre as casas decimais das variáveis no RPG Maker, ou seja, saber encontrar a unidade, dezena, centena, milhar e assim vai...
Antes de fazer as aplicações, você precisa pensar: "Poxa, como é que eu posso fazer isso calculando somente números inteiros?". De repente, a lâmpada na cabeça 
.
Peguei um número qualquer, "12345" (Doze mil trezentos e quarenta e cinco). Com esse número, eu fiz os seguintes cálculos:
No primeiro cálculo, percebemos que resto 5 coincide com o último dígito do número. Descobrimos a Unidade. Já então no segundo cálculo, encontramos o resto 45. Mas e agora? Não era pra achar a dezena? Calma. Ainda não terminou o cálculo da segunda, pegamos o resto e divimos por 10. Mas por que 10 ao invés de 100? É uma técnica que eu uso: Cada vez que você encontra um resto, ela, praticamente, perde uma casa.
Veja o cálculo para entender melhor:
Muito bem! Encontramos a sua dezena, que é 4. O resto só será importante quando você calcula pela primeira vez. Depois disso vem o quociente (resultado). O caso da centena é o mesmo caso, só que com uma casa a mais:
Você encontrou 3. Para milhares é só subir mais uma casa e assim por diante.
Seguindo esse raciocínio, agora sim você aplica ao seu RPG Maker, usando a mesma forma que você criou na cabeça ou no papel. Para descobrir o resto de uma divisão, é só utilizar o operador Mod (no 2003 está com o símbolo +/-):
Notamos que eu não descobri o resto da divisão de v[2] e muito menos dividi o v[6]. O motivo é que não há necessidade. O quociente de 12345/10000 é 1 e v[6] já está resolvido, deu 5.
Para ver se deu certo, crie uma mensagem e teste o RPG Maker:
O resultado será esse:
A função destes cálculos é justamente para aqueles que desejam fazer menus personalizados, CBS's e várias maneiras de aplicar esses números.
Espero que tenham gostado deste tutorial.
Muita gente já deve conhecer esse macete, mas é sempre bom compartilhar aqui para aqueles que ainda não sabem.
Um abraço a todos e até a próxima!
Much obliged. Thanks! , dude. As usual, you come through like a champ! I like your work. เล่นบาคาร่า
What Problems Need To Be Faced When Opening Oil Mills
It is necessary for many novices to understand clearly what problems need to be faced when opening an oil mill. Only by knowing oneself and the enemy can the oil mill be profitable. Many novices blindly buy an oil press to open an oil mill when they see that other people’s business is booming. In fact, this is often without adequate preparations, so it is difficult to make money. So what are the problems that open oil mills need to face?
It does not require much area to open an oil mill. Generally, the oil press covers an area of more than two square meters, plus the seed-frying pot is more than three square meters. A large oil press is enough for three square meters. If you include the space for raw materials and oil cans, renting a house of 20-45 square meters is completely sufficient. If you talk about your own house and don’t consider the issue of rent at all, one house is enough.
If it mainly sells oil, it is a business license and a sanitation license. If it is mainly for external processing, there is no need to apply for any certificate.
The early-stage publicity of the oil mill is very important. In the early stage, leaflets and preferential policies can be distributed through various channels. Just start squeezing oil, and the fragrance of oil will automatically attract customers. Customers are relatively concentrated and fixed, such as restaurants, corporate canteens, and residential areas. As long as your oil is good, as long as it is approved, the cooking oil you provide will be used for a long time, and this business will be long-term.
To open an oil mill, you must choose a multi-function oil press, one machine for multiple purposes, can squeeze peanuts, rapeseed, oil sunflower, soybeans, cottonseed and other raw materials. Because the business model of open oil mill is not fixed, it is necessary to examine the needs of various customers. The oil presses with the most users are the 100-type oil press, the 95-type oil press, and the 130-type oil press.
The main business model of open oil mill is to press and sell oil and process with supplied materials. In cities and areas with relatively few raw materials, the oil is mainly pressed and sold, and the profit of oil pressing and selling is very considerable. If it is a raw material producing area, it is mainly raw material processing. The two can also be combined, either processing supplied materials or squeezing oil and selling oil, operating in multiple directions.
That is the excellent mindset, nonetheless is just not help to make every sence whatsoever preaching about that mather. Virtually any method many thanks in addition to i had endeavor to promote your own article in to delicius nevertheless it is apparently a dilemma using your information sites can you please recheck the idea. thanks once more. trippy flip edibles
This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free. the presence of love
แทงบอลออนไลน์ ต้องมาเดิมพันกับเราที่ IMBIG เว็บพนันบอล ฝาก-ถอน 100% ผู้ให้บริการทางด้านกีฬาออนไลน์และคาสิโนออนไลน์
I've been troubled for several days with this topic. safetoto But by chance looking at your post solved my problem! I will leave my blog, so when would you like to visit it?
