Blogs

Mais Recentes

• Important components of printed circuit boards

  by FSPCBA FSPCBA 24 de julho de 2022
  If you've seen what a printed circuit board looks like before, you know that there are many components on a printed circuit board. The one-stop PCB assembly company installs these pcb components on the bare pcb board in various ways. These components are an important part of the circuit board. ...

• PCB circuit board design software-FS Technology

  by FSPCBA FSPCBA 11 de julho de 2022
  Abstract: Design a printed circuit board based on a schematic circuit to perform the functions required by the circuit manufacturer. Print design design refers to the circuit design, which must take into account the external design of the joint, the detailed design of the internal electrical compone...

• PCB-FS technical drawing

  by FSPCBA FSPCBA 15 de junho de 2022
  1. The circumference of the circle should be very obvious. For Feisheng circular boards, for chips with IC pin spacing less than 0.65mm, there must be a signal that can significantly change the chip position to the longest side of the IC. If there are islands on both sides of the PCB, then bot...

• Considerations for Designing Clock PCBs-FS Technology

  by FSPCBA FSPCBA 9 de junho de 2022
    The clock crystal and associated circuits should be placed in the center of the PCB and should have a good ground plane, not close to the I/O interface. Clock generation circuits are not allowed in the form of daughter cards or daughter boards, and must be fabricated on separate clock boards...